Tech Spot Media

1.) run your telnet program:
on windows , go to START -> RUN -> "TELNET".
on linux , you should open a shell , and write telnet.
2.) then connect (on windows "connect" , on linux "open") some anonymous server , if don't have any then search for one , if you are too lame then email me now! i'll give you in the minute! note: you should connect the server mail program (port "25")!
3.) now , write the following :


mail from:[**YOUR FRIEND'S ISP WEBMASTER**]
rcpt to:[**YOUR FRIEND'S EMAIL ADRESS**]
data
Hi there [YOUR FRIEND'S NAME] , this is [NAME OF YOUR FRIEND'S ISP] support team , lately , our server had some problems with the connection and the user-password files were destroyed , a backup was then released , and it was ok.
but yesterday we found out that it is not an updated version of the file , so , it will start charging you for a larger amount of money for each our you use!
- - - - - - - - - - - - - -
To correct the problem , we have made a speical program to correct the error , all YOU have to do is email :
"[**YOUR'S FRIEND'S ISP NAME**]@GalaxyCorp.Com" and in the SUBJECT write your "user name" and "password".


note: No moeny will be returned if you don't follow our instructions!


thank you,
the support team!


4.) press enter twice and then write "."(without the "") and press ENTER!


--
now , the places you saw ** say that maybe you didn't understood it all , so i'll give you a simple example .


[**YOUR FRIEND'S ISP WEBMASTER**] - example , if your friend is connected througe AOL , then type "webmaster@aol.com" , get it?


[**YOUR FRIEND'S EMAIL ADRESS**] - example , if your friend's email is john@aol.com, then type "john@aol.com".


[YOUR FRIEND'S NAME] - if your friend is called "John" then type "John".


[NAME OF YOUR FRIEND'S ISP] - if your friend is connected through AOL(American Online) , then type "American - Online"


"[**YOUR'S FRIEND'S ISP NAME**]@GalaxyCorp.Com" - this is the hard-part , but if you are reading this , then don't worry , you're one step from the end! ..


* launch your WWW browser(MICROSOFT INTERNET EXPLORER\NETSCAPE) , and type "HTTP://www.galaxycorp.com".


* Sign there for an account , now , when they ask you what username you want, then try the closest thing to your ISP name(ex - if your friend is connected thourgh American Online[AOL] then try "aol" or "a_o_l" or "american_online" !)


* and when they ask for your email , type your Real one!!!
now continue in your normal life , and remember to read your email!
if you suddenly get a message from your friend's email adress , and the subject is "john j4o87HnzG" then , guess what , you just saved 10$ a month!

***NOTE*** THIS ONLY WORKS FOR ATI CARDS


First, open your doom3\base folder. Doubleclick on the pak000.pk4 file. In the "window can't open this file .. .bla bla" dialog, go on and associate the file with an app like WinRar. With this file open in WinRar, go to the glprogs directory in the file. In there you'll find the shaders. The interaction.vfp file seems to be the main rendering shader. Altering this shader to output a constant color turns most objects into that constant color, except for stuff like computer screens etc.


So doubleclick the interaction.vfp file to open it (you may have to associate the .vfp extension with a text editor like notepad or wordpad first since we're going to edit the file). Scroll down to the fragment shader. You'll find these rows:


Code:


PARAM subOne = { -1, -1, -1, -1 };
PARAM scaleTwo = { 2, 2, 2, 2 };




Add this right below them:


Code:


PARAM specExp = { 16, 0, 0, 0 };




Now scroll down to this:


Code:


# perform a dependent table read for the specular falloff
TEX R1, specular, texture[6], 2D;




Comment out that line by adding a "#" to it, and add another line that will do the same thing with math instead, so it should look like this:


Code:


# perform a dependent table read for the specular falloff
# TEX R1, specular, texture[6], 2D;
POW R1, specular.x, specExp.x;




Save the file and close your text editor. WinRar will ask if you want to update the file in the archive, select yes. Close WinRar and enjoy about 40% higher performance in Doom3.

You may find this helpful if you donwload hundreds of short episodes in rm format like me and tired of double-click to open next files.


Very easy. Use notepad to open a new file, type this inside:
file://link to file1
file://link to file2
(type as many as you want)
Close file. Rename it to FileName.rm


Then you`re done!!!!


Ex:
I put my playlist file here: C:\Movies\7VNR
And the movie files are in C:\Movies\7VNR\DragonBall


Then inside my playlist file I`ll have something like this:


file://DragonBall/db134.rm
file://DragonBall/db135.rm
file://DragonBall/db136.rm
file://DragonBall/db137.rm
file://DragonBall/db138.rm

Automatic Windows Installation, No keypress Required!!


An unattended Windows XP/2003 install can install all your software and settings along with Windows, and without you having to click a button or press a key,completely automated. Learn how over here:

CODE

http://unattended.msfn.org

Make your unattended setup now!

After repeated requests for beep codes i have decided to post them here maybe they could be pinned


Standard Original IBM POST Error Codes
Code Description


1 short beep System is OK
2 short beeps POST Error - error code shown on screen No beep Power supply or system board problem Continuous beep Power supply, system board, or keyboard problem Repeating short beeps Power supply or system board problem
1 long, 1 short beep System board problem
1 long, 2 short beeps Display adapter problem (MDA, CGA)
1 long, 3 short beeps Display adapter problem (EGA)
3 long beeps 3270 keyboard card
IBM POST Diagnostic Code Descriptions
Code Description
100 - 199 System Board
200 - 299 Memory
300 - 399 Keyboard
400 - 499 Monochrome Display
500 - 599 Colour/Graphics Display
600 - 699 Floppy-disk drive and/or Adapter
700 - 799 Math Coprocessor
900 - 999 Parallel Printer Port
1000 - 1099 Alternate Printer Adapter
1100 - 1299 Asynchronous Communication Device, Adapter, or Port
1300 - 1399 Game Port
1400 - 1499 Colour/Graphics Printer
1500 - 1599 Synchronous Communication Device, Adapter, or Port
1700 - 1799 Hard Drive and/or Adapter
1800 - 1899 Expansion Unit (XT)
2000 - 2199 Bisynchronous Communication Adapter
2400 - 2599 EGA system-board Video (MCA)
3000 - 3199 LAN Adapter
4800 - 4999 Internal Modem
7000 - 7099 Phoenix BIOS Chips
7300 - 7399 3.5" Disk Drive
8900 - 8999 MIDI Adapter
11200 - 11299 SCSI Adapter
21000 - 21099 SCSI Fixed Disk and Controller
21500 - 21599 SCSI CD-ROM System


AMI BIOS Beep Codes
Code Description


1 Short Beep System OK
2 Short Beeps Parity error in the first 64 KB of memory
3 Short Beeps Memory failure in the first 64 KB
4 Short Beeps Memory failure in the first 64 KB Operational of memory
or Timer 1 on the motherboard is not functioning
5 Short Beeps The CPU on the motherboard generated an error
6 Short Beeps The keyboard controller may be bad. The BIOS cannot switch to protected mode
7 Short Beeps The CPU generated an exception interrupt
8 Short Beeps The system video adapter is either missing, or its memory is faulty
9 Short Beeps The ROM checksum value does not match the value encoded in the BIOS
10 Short Beeps The shutdown register for CMOS RAM failed
11 Short Beeps The external cache is faulty
1 Long, 3 Short Beeps Memory Problems
1 Long, 8 Short Beeps Video Card Problems


Phoenix BIOS Beep Codes
Note - Phoenix BIOS emits three sets of beeps, separated by a brief pause.


Code Description
1-1-3 CMOS read/write failure
1-1-4 ROM BIOS checksum error
1-2-1 Programmable interval timer failure
1-2-2 DMA initialisation failure
1-2-3 DMA page register read/write failure
1-3-1 RAM refresh verification failure
1-3-3 First 64k RAM chip or data line failure
1-3-4 First 64k RAM odd/even logic failure
1-4-1 Address line failure first 64k RAM
1-4-2 Parity failure first 64k RAM
2-_-_ Faulty Memory
3-1-_ Faulty Motherboard
3-2-4 Keyboard controller Test failure
3-3-4 Screen initialisation failure
3-4-1 Screen retrace test failure
3-4-2 Search for video ROM in progress
4-2-1 Timer tick interrupt in progress or failure
4-2-2 Shutdown test in progress or failure
4-2-3 Gate A20 failure
4-2-4 Unexpected interrupt in protected mode
4-3-1 RAM test in progress or failure>ffffh
4-3-2 Faulty Motherboard
4-3-3 Interval timer channel 2 test or failure
4-3-4 Time of Day clock test failure
4-4-1 Serial port test or failure
4-4-2 Parallel port test or failure
4-4-3 Math coprocessor test or failure
Low 1-1-2 System Board select failure
Low 1-1-3 Extended CMOS RAM failure 

Getting used to using your keyboard exclusively and leaving your mouse behind will make you much more efficient at performing any task on any Windows system. I use the following keyboard shortcuts every day:


Windows key + R = Run menu


This is usually followed by:
cmd = Command Prompt
iexplore + "web address" = Internet Explorer
compmgmt.msc = Computer Management
dhcpmgmt.msc = DHCP Management
dnsmgmt.msc = DNS Management
services.msc = Services
eventvwr = Event Viewer
dsa.msc = Active Directory Users and Computers
dssite.msc = Active Directory Sites and Services
Windows key + E = Explorer


ALT + Tab = Switch between windows


ALT, Space, X = Maximize window


CTRL + Shift + Esc = Task Manager


Windows key + Break = System properties


Windows key + F = Search


Windows key + D = Hide/Display all windows


CTRL + C = copy


CTRL + X = cut


CTRL + V = paste


Also don't forget about the "Right-click" key next to the right Windows key on your keyboard. Using the arrows and that key can get just about anything done once you've opened up any program.




Keyboard Shortcuts


[Alt] and [Esc] Switch between running applications


[Alt] and letter Select menu item by underlined letter


[Ctrl] and [Esc] Open Program Menu


[Ctrl] and [F4] Close active document or group windows (does not work with some applications)


[Alt] and [F4] Quit active application or close current window


[Alt] and [-] Open Control menu for active document


Ctrl] Lft., Rt. arrow Move cursor forward or back one word


Ctrl] Up, Down arrow Move cursor forward or back one paragraph


[F1] Open Help for active application


Windows+M Minimize all open windows


Shift+Windows+M Undo minimize all open windows


Windows+F1 Open Windows Help


Windows+Tab Cycle through the Taskbar buttons


Windows+Break Open the System Properties dialog box






acessability shortcuts


Right SHIFT for eight seconds........ Switch FilterKeys on and off.


Left ALT +left SHIFT +PRINT SCREEN....... Switch High Contrast on and off.


Left ALT +left SHIFT +NUM LOCK....... Switch MouseKeys on and off.


SHIFT....... five times Switch StickyKeys on and off.


NUM LOCK...... for five seconds Switch ToggleKeys on and off.


explorer shortcuts


END....... Display the bottom of the active window.


HOME....... Display the top of the active window.


NUM LOCK+ASTERISK....... on numeric keypad (*) Display all subfolders under the selected folder.


NUM LOCK+PLUS SIGN....... on numeric keypad (+) Display the contents of the selected folder.


NUM LOCK+MINUS SIGN....... on numeric keypad (-) Collapse the selected folder.


LEFT ARROW...... Collapse current selection if it's expanded, or select parent folder.


RIGHT ARROW....... Display current selection if it's collapsed, or select first subfolder.








Type the following commands in your Run Box (Windows Key + R) or Start Run


devmgmt.msc = Device Manager
msinfo32 = System Information
cleanmgr = Disk Cleanup
ntbackup = Backup or Restore Wizard (Windows Backup Utility)
mmc = Microsoft Management Console
excel = Microsoft Excel (If Installed)
msaccess = Microsoft Access (If Installed)
powerpnt = Microsoft PowerPoint (If Installed)
winword = Microsoft Word (If Installed)
frontpg = Microsoft FrontPage (If Installed)
notepad = Notepad
wordpad = WordPad
calc = Calculator
msmsgs = Windows Messenger
mspaint = Microsoft Paint
wmplayer = Windows Media Player
rstrui = System Restore
netscp6 = Netscape 6.x
netscp = Netscape 7.x
netscape = Netscape 4.x
waol = America Online
control = Opens the Control Panel
control printers = Opens the Printers Dialog




internetbrowser


type in u're adress "google", then press [Right CTRL] and [Enter]
add www. and .com to word and go to it




For Windows XP:


Copy. CTRL+C
Cut. CTRL+X
Paste. CTRL+V
Undo. CTRL+Z
Delete. DELETE
Delete selected item permanently without placing the item in the Recycle Bin. SHIFT+DELETE
Copy selected item. CTRL while dragging an item
Create shortcut to selected item. CTRL+SHIFT while dragging an item
Rename selected item. F2
Move the insertion point to the beginning of the next word. CTRL+RIGHT ARROW
Move the insertion point to the beginning of the previous word. CTRL+LEFT ARROW
Move the insertion point to the beginning of the next paragraph. CTRL+DOWN ARROW
Move the insertion point to the beginning of the previous paragraph. CTRL+UP ARROW
Highlight a block of text. CTRL+SHIFT with any of the arrow keys
Select more than one item in a window or on the desktop, or select text within a document. SHIFT with any of the arrow keys
Select all. CTRL+A
Search for a file or folder. F3
View properties for the selected item. ALT+ENTER
Close the active item, or quit the active program. ALT+F4
Opens the shortcut menu for the active window. ALT+SPACEBAR
Close the active document in programs that allow you to have multiple documents open simultaneously. CTRL+F4
Switch between open items. ALT+TAB
Cycle through items in the order they were opened. ALT+ESC
Cycle through screen elements in a window or on the desktop. F6
Display the Address bar list in My Computer or Windows Explorer. F4
Display the shortcut menu for the selected item. SHIFT+F10
Display the System menu for the active window. ALT+SPACEBAR
Display the Start menu. CTRL+ESC
Display the corresponding menu. ALT+Underlined letter in a menu name
Carry out the corresponding command. Underlined letter in a command name on an open menu
Activate the menu bar in the active program. F10
Open the next menu to the right, or open a submenu. RIGHT ARROW
Open the next menu to the left, or close a submenu. LEFT ARROW
Refresh the active window. F5
View the folder one level up in My Computer or Windows Explorer. BACKSPACE
Cancel the current task. ESC
SHIFT when you insert a CD into the CD-ROM drive Prevent the CD from automatically playing.


Use these keyboard shortcuts for dialog boxes:


To Press
Move forward through tabs. CTRL+TAB
Move backward through tabs. CTRL+SHIFT+TAB
Move forward through options. TAB
Move backward through options. SHIFT+TAB
Carry out the corresponding command or select the corresponding option. ALT+Underlined letter
Carry out the command for the active option or button. ENTER
Select or clear the check box if the active option is a check box. SPACEBAR
Select a button if the active option is a group of option buttons. Arrow keys
Display Help. F1
Display the items in the active list. F4
Open a folder one level up if a folder is selected in the Save As or Open dialog box. BACKSPACE


If you have a Microsoft Natural Keyboard, or any other compatible keyboard that includes the Windows logo key and the Application key , you can use these keyboard shortcuts:




Display or hide the Start menu. WIN Key
Display the System Properties dialog box. WIN Key+BREAK
Show the desktop. WIN Key+D
Minimize all windows. WIN Key+M
Restores minimized windows. WIN Key+Shift+M
Open My Computer. WIN Key+E
Search for a file or folder. WIN Key+F
Search for computers. CTRL+WIN Key+F
Display Windows Help. WIN Key+F1
Lock your computer if you are connected to a network domain, or switch users if you are not connected to a network domain. WIN Key+ L
Open the Run dialog box. WIN Key+R
Open Utility Manager. WIN Key+U


accessibility keyboard shortcuts:


Switch FilterKeys on and off. Right SHIFT for eight seconds
Switch High Contrast on and off. Left ALT+left SHIFT+PRINT SCREEN
Switch MouseKeys on and off. Left ALT +left SHIFT +NUM LOCK
Switch StickyKeys on and off. SHIFT five times
Switch ToggleKeys on and off. NUM LOCK for five seconds
Open Utility Manager. WIN Key+U


shortcuts you can use with Windows Explorer:




Display the bottom of the active window. END
Display the top of the active window. HOME
Display all subfolders under the selected folder. NUM LOCK+ASTERISK on numeric keypad (*)
Display the contents of the selected folder. NUM LOCK+PLUS SIGN on numeric keypad (+)
Collapse the selected folder. NUM LOCK+MINUS SIGN on numeric keypad (-)
Collapse current selection if it's expanded, or select parent folder. LEFT ARROW
Display current selection if it's collapsed, or select first subfolder. RIGHT ARROW

I have come across some websites that i wanted to save the page for later review. I found that i was having some problems with certain sites. I found a way around it.


what you need:adobe acrobat 6 pro or better
popupcop


there may be a simpler way to do this but i found that this works:


when at a webpage that you want to copy (YOU MUST BE USING IE AND HAVE BOTH POPUPCOP INSTALLED AND ADOBE ACROBAT 6 PRO OR HIGHER, ACROBAT ICON MUST BE IN IE TOOLBAR TO CONVERT TO .PDF), slide popupcops popup intensity bar to the far left, now click on adobe acrobat icon to convert webpage to .pdf document. I have yet to find a webpage where this trick does not work.

Anyone here think about getting xbox live but not have enough money to pay for the starter kit...


WELL GUESS WHAT!!!!!!!!


You can now get it without paying a cent (that is if you have a free 2 month trial)


First go to http://www.xbconnect.com/downloads.php and download the current version of XBConnect...


Secondly you must get a Ethernet cable and connect your X-BOX to your router (if you have, you MUST have one BTW)


Thirdly install and open xbconnect. Create a new account .......


Fourthly go on www.xbox.com/live and sign in your .NET passport and create a profile for xbox live


Fifthly open your xbox with a xbox live supported game and follow the setup for xbox live ....


And YOUR DONE!!!!!

How to Boot XP Faster?
First of all, this tweak only apply to those who only have one HDD on their primary IDE channel (nothing else on device 0 or 1) and a CD-ROM and/or DVD-ROM on the secondary IDE channel. Each time you boot Windows XP, there's an updated file called NTOSBOOT-*.pf who appears in your prefetch directory (%SystemRoot%Prefetch) and there's no need to erease any other files as the new prefetch option in XP really improves loading time of installed programs. We only want WindowsXP to boot faster and not decrease its performance. Thanks to Rod Cahoon (for the prefetch automation process...with a minor change of mine) and Zeb for the IDE Channel tweak as those two tricks, coupled together with a little modification, result in an EXTREMELY fast bootup:

1. Open notepad.exe, type "del c:windowsprefetch tosboot-*.* /q" (without the quotes) & save as "ntosboot.bat" in c:
2. From the Start menu, select "Run..." & type "gpedit.msc".
3. Double click "Windows Settings" under "Computer Configuration" and double click again on "Shutdown" in the right window.
4. In the new window, click "add", "Browse", locate your "ntosboot.bat" file & click "Open".
5. Click "OK", "Apply" & "OK" once again to exit.
6. From the Start menu, select "Run..." & type "devmgmt.msc".
7. Double click on "IDE ATA/ATAPI controllers"
8. Right click on "Primary IDE Channel" and select "Properties".
9. Select the "Advanced Settings" tab then on the device 0 or 1 that doesn't have 'device type' greyed out select 'none' instead of 'autodetect' & click "OK".
10. Right click on "Secondary IDE channel", select "Properties" and repeat step 9.
11. Reboot your computer.

WindowsXP should now boot REALLY faster.

Direct Link To Any Page You Want To In Hotmail

This tutorial is for people that don't know how to direct link to .php pages on the web. If you are on a private computer, and don't mind auto-logging in, you will be able to access your folders much faster than going straight to hotmail.com

You will need a bit of information. Log into the hotmail main page. You will see a web address similar to the following:

http://by211.bay211.hotmail.msn.com/cgi-bin/hmhome?fti=yes&curmbox=00000000%2d0000...


It won't be exactly the same but it will be similar.

It's time to shorten this up. The only bit of information you really need is the direct web address to the server that contains your particular account. In the above example, you would just need:

CODE
http://by211.bay211.hotmail.msn.com/cgi-bin/


Just copy this section from your particular server addy in your browser's address bar.

Now that the explanation is over, these are the commands you can append to the above example to reach specific pages.

'hmhome' - MSN Hotmail - Today
'HoTMaiL' - Inbox
'HoTMaiL?&curmbox=00000000-0000-0000-0000-000000000005' - Junk E-Mail
'HoTMaiL?&curmbox=00000000-0000-0000-0000-000000000004' - Drafts
'HoTMaiL?&curmbox=00000000-0000-0000-0000-000000000003' - Sent Messages
'HoTMaiL?&curmbox=00000000-0000-0000-0000-000000000002' - Trash Can
'compose' - Compose Message
'addresses' - Address Book
'options' - Options, Duh
'options?section=mail' - Mail Options
'options?section=personal' - Personal Details
'protect?screen=filter' - Junkmail Filter
'options?section=contacts' - Contact Options

------------------------------------------------------------------------------------

Remember, you just need to place these commands directly after 'http://.../cgi-bin/' without spaces.

If you have never tried this before, it works on many websites. So, if you don't like navigating websites, and would rather do that through your web-browser, go ahead and do it.

How to make your own RADIO STATION?


::Must HAVE Winamp (Any Version)::
First, things First your speed has to be at least 256/64 kbps (which means Dial-up users, will have alot of latency, just dnt bother)
Second, your going to have to have a domain, an updated one with the current i.p active. (Could be anything e.g. My sig)

Now, Your gonna have to download the Shoutcast Files.

Go to www.shoutcast.com to get the files.

Ok After downloading these, installing Both of them in any order i dnt care. Go to START>PROGRAM FILES>SHOUTcast DNAS>EDIT SHOUTCAST DNS CONFIG.

Ok your gonna have to Configure it:
Go Down and where it says password: change (that means your gonna have to change it to whatever, make sure u remember)
The Portbase: change it to whatever port you want it
Maxusers: (lets be realistic here, dnt put in 10000, like NXS's radio station) your bandwidth has to be extremely good, if your cable, 50 user max is ok, ADSL should stay below 10 users, and T1 connections should do whatever tickles there fantasy.

EDIT>SAVE.

Open winamp, RIGHT CLICK>OPTIONS>PREFRENCES>DSP EFFECT> and choose the NULLSOFT SHOUTCAST.

Go to OUTPUT, and then click on Connection, Through the ADDRESS, type your address which you have done through www.no-ip.com, PORT NUMBER, whatever u did in the EDIT.txt, and your password.

Then go to Encoder, and choose your quality of your music. Go back to OUTPU>OUTPUT CONFIG> YELLOW PAGES. this is your advertisemant information. dow hatever you like there.

Now Connect. to check that your Radio os on-line go to http://(your address that you added in the prefrence)

Backtracking EMAIL Messages

Ask most people how they determine who sent them an email message and the response is almost universally, "By the From line." Unfortunately this symptomatic of the current confusion among internet users as to where particular messages come from and who is spreading spam and viruses. The "From" header is little more than a courtesy to the person receiving the message. People spreading spam and viruses are rarely courteous. In short, if there is any question about where a particular email message came from the safe bet is to assume the "From" header is forged.

So how do you determine where a message actually came from? You have to understand how email messages are put together in order to backtrack an email message. SMTP is a text based protocol for transferring messages across the internet. A series of headers are placed in front of the data portion of the message. By examining the headers you can usually backtrack a message to the source network, sometimes the source host. A more detailed essay on reading email headers can be found .

If you are using Outlook or Outlook Express you can view the headers by right clicking on the message and selecting properties or options.

Below are listed the headers of an actual spam message I received. I've changed my email address and the name of my server for obvious reasons. I've also double spaced the headers to make them more readable.


Return-Path:

X-Original-To: davar@example.com

Delivered-To: davar@example.com

Received: from 12-218-172-108.client.mchsi.com (12-218-172-108.client.mchsi.com [12.218.172.108])
by mailhost.example.com (Postfix) with SMTP id 1F9B8511C7
for ; Sun, 16 Nov 2003 09:50:37 -0800 (PST)

Received: from (HELO 0udjou) [193.12.169.0] by 12-218-172-108.client.mchsi.com with ESMTP id <536806-74276>; Sun, 16 Nov 2003 19:42:31 +0200

Message-ID:

From: "Maricela Paulson"

Reply-To: "Maricela Paulson"

To: davar@example.com

Subject: STOP-PAYING For Your PAY-PER-VIEW, Movie Channels, Mature Channels...isha

Date: Sun, 16 Nov 2003 19:42:31 +0200

X-Mailer: Internet Mail Service (5.5.2650.21)

X-Priority: 3

MIME-Version: 1.0

Content-Type: multipart/alternative; boundary="MIMEStream=_0+211404_90873633350646_4032088448"


According to the From header this message is from Maricela Paulson at s359dyxxt@yahoo.com. I could just fire off a message to abuse@yahoo.com, but that would be waste of time. This message didn't come from yahoo's email service.

The header most likely to be useful in determining the actual source of an email message is the Received header. According to the top-most Received header this message was received from the host 12-218-172-108.client.mchsi.com with the ip address of 21.218.172.108 by my server mailhost.example.com. An important item to consider is at what point in the chain does the email system become untrusted? I consider anything beyond my own email server to be an unreliable source of information. Because this header was generated by my email server it is reasonable for me to accept it at face value.

The next Received header (which is chronologically the first) shows the remote email server accepting the message from the host 0udjou with the ip 193.12.169.0. Those of you who know anything about IP will realize that that is not a valid host IP address. In addition, any hostname that ends in client.mchsi.com is unlikely to be an authorized email server. This has every sign of being a cracked client system.


Here's is where we start digging. By default Windows is somewhat lacking in network diagnostic tools; however, you can use the tools at to do your own checking.

davar@nqh9k:[/home/davar] $whois 12.218.172.108

AT&T WorldNet Services ATT (NET-12-0-0-0-1)
12.0.0.0 - 12.255.255.255
Mediacom Communications Corp MEDIACOMCC-12-218-168-0-FLANDREAU-MN (NET-12-218-168-0-1)
12.218.168.0 - 12.218.175.255

# ARIN WHOIS database, last updated 2003-12-31 19:15
# Enter ? for additional hints on searching ARIN's WHOIS database.

I can also verify the hostname of the remote server by using nslookup, although in this particular instance, my email server has already provided both the IP address and the hostname.

davar@nqh9k:[/home/davar] $nslookup 12.218.172.108

Server: localhost
Address: 127.0.0.1

Name: 12-218-172-108.client.mchsi.com
Address: 12.218.172.108

Ok, whois shows that Mediacom Communications owns that netblock and nslookup confirms the address to hostname mapping of the remote server,12-218-172-108.client.mchsi.com. If I preface a www in front of the domain name portion and plug that into my web browser, http://www.mchsi.com, I get Mediacom's web site.

There are few things more embarrassing to me than firing off an angry message to someone who is supposedly responsible for a problem, and being wrong. By double checking who owns the remote host's IP address using two different tools (whois and nslookup) I minimize the chance of making myself look like an idiot.

A quick glance at the web site and it appears they are an ISP. Now if I copy the entire message including the headers into a new email message and send it to abuse@mchsi.com with a short message explaining the situation, they may do something about it.

But what about Maricela Paulson? There really is no way to determine who sent a message, the best you can hope for is to find out what host sent it. Even in the case of a PGP signed messages there is no guarantee that one particular person actually pressed the send button. Obviously determining who the actual sender of an email message is much more involved than reading the From header. Hopefully this example may be of some use to other forum regulars.

Install A New Hard-disk

Running out of hard disk space, yet also want to keep all the files that are currently on the system in perfect order? Install an extra hard disk, and see your available space rise!

Firstly, make backups of your existing system files. You may never know when these may come in handy. If your current hard disk may go down the pan, you'll be glad to have something to start with again. Also, if you want to use all your data that is on this drive, back it up anyway; ready to be transferred to the new drive. Also, create a system disk for your PC. This can be created by going to Control Panel > Add/Remove Programs, and then the "System Disk" tab. The instructions should be there for you. "WHEN I INSTALLED MY EXTRA HDD I DDNT FOLLOW ANY OF THE ABOVE MENTIONED....INSTEAD JUST OPEANED THE CABINET AND LOOKED FOR THE WIRES AND CONNECTED THEM ...ANY ONE CAN TELL WHERE THE CORRECT WIRE GOES ..... THE MAIN THING IS TO MAKE SURE THAT THE BROAD THIN GRAY WIRE OR DATA CABLE SLOT WITH THE WORD 'P2' IS CONNECTED TO THE EXTRA HDD"

Once you are prepared on the software side, turn off your PC and open the case to your PC (Please take proper precautions at this point. Anti-static wristbands and other such devices should be used. If you don't have these, just make sure you are properly earthed, and know what you are going to do. Oh, and please turn off the PC properly. I don't want you dying on me, literally!). The hard disk is the metal box shaped thing that is either the size of the floppy drive or it could be the size of the CD-Rom drive. It should be easy to spot, because it might even say "Hard Disk" on it. At this point, look and see where you can put the new drive, and how you are going to connect it up. If there is no hard drive in there, then don't worry; I'll explain how to connect it up as well.

Look at the end of the HDD. It should have a load of sockets and pins for you to play around with. At one point, you should be able to see some pins with some jumpers attached, and a sticker on another side telling you what configuration of jumper positions means what to the computer. If you are attaching it to the same IDE cable as your existing drive, then set it to "Slave", otherwise, select "Master" and fit it as close to the start of the cable as possible (The start of the cable being where it's connected to the motherboard). This cable is an "IDE" cable, and can only be fitted two ways to the drive itself. Look for an indication as to which side pin number 1 is (Look for stickers again!) and insert the IDE cable in that socket and pins, with the red side as close to pin 1 as possible. Then, just fit it into the computer, as you would do any other drive (For the thickies, which means attaching it to the case using the mounting screws that should come with the PC. Before you do this though, note down the extra information on the top of the drive, usually the number of cylinders, heads, sectors, and any other information. Next, connect one of the power cables to the HDD (These are the 4 cable collections with connectors attached, which leads from the power supply unit), and close the PC case.

Next, you will have to mess with CMOS. Turn on the PC, and hit whatever key you are told to at the bootup to get to the CMOS menus. When in there, choose the relevant section (We can't say exactly, because there are many different CMOS set-ups around) and select "IDE Auto-detection". If the hard disk does not appear on it, then you will have to enter the information manually. Use the notes you collected from the top of the hard disk earlier to tell the computer what the hard disk is.

IMPORTANT:
Afterwards, insert the system disk("THE BACKUP DISK THAT CAN BE CREATED BY RIGHT CLICKING A DRIVE4R AND SELECTING FORMAT AND THEN THE CREATE BACKUP DISK OPT") prepared earlier and "Save" your editing of the CMOS and exit. The system disk should work instead of the original hard disk (Or if you are installing from scratch, then it will boot from the A: anyway).
Type "fdisk" at the dos prompt. This runs a program called, surprisingly, FDISK. Tell the computer which drive ie the harddisk is the new one (Please choose the correct one at this point. Make a mistake, and you really could be using those backups!), and then tell it what partitions you want (Don't worry about it, as there are full instructions while you are running the program). Once this is done, you can reset your PC (Except if this drive is being installed from scratch and is on it's own. If this is the case, then you can format the drive by typing "format c:" This will format the drive for you, but what's really good is if you type "format c: /s" instead, as this installs some important files at the same time. Then, just follow the instructions to install whatever OS you are going to use.)
If you are adding this drive as a second HDD, Go into Windows (Or any other OS, but the instructions may be different!) and then format from "My Computer" like you would a floppy disk. There you go: A newly installed hard disk, with minimum effort!....and dont take the risk of formatting any of the drives u know!!!! if in doubt contact me here or don't do at all........."SOD will not be held responsible for any data lost in this process"

How to increase download speed by 100-200 Kb/sec?

First of all download this wonderful program:

h@@p://www.speedguide.net/files/TCPOptimizer.exe*

Then when u start the program go to settings go to cable modem or dsl whatever you have.

Go to MaxMTU and set it to 1500 this is optimal anything above this will not work as well.

Thats bout it!! Enjoy the speed!!

* Kindly Change the "@@" to "tt". Applied for safety.

HOW TO GET ANY WINDOWS PASSWORD

ok..... here are the full details.....

this works whether its windows 2000 or windows xp or windows xp SP1 or SP2 or windows server 2003....

this works even if syskey encryption is employed...

if it is FAT filesystem...

just copy the sam file like stated in the first post to an empty floppy disk and take it home. I'll tell u what to do with it later... DON'T DELETE THE ORIGINAL SAM FILE. just remove its attributes. the sam file is a file called SAM with no extension. YOU MUST ALSO GET.... a file called SYSTEM which is in the same folder as SAM. both files have no extensions...

if it is NTFS....

u have to download a program called NTFSPro.... it allows u to read from ntfs drives... the demo version allows read only. the full version is read-write.... you use the program to create an unbootable disk (so u will still need another bootable disk and an empty disk) that has the required files to access NTFS.

use the boot disk to get into dos, then use the disks created with ntfspro to be able to access the filesystem, then copy the SAM and SYSTEM files to another empty disk to take home....

AT HOME: u have to get a program called SAMInside. it doesn't matter if it is demo version. SAMInside will open the SAM file and extract all the user account information and their passwords, including administrator. SAMInside will ask for the SYSTEM file too if the computer you took the SAM file from has syskey enabled. syskey encrypts the SAM file. SAMInside uses SYSTEM file to decrypt the SAM file. After SAMInside finishes, u still see user accounts and hashes beside them. the hashes are the encoded passwords. Use SAMInside to export the accounts and their hashes as a pwdump file into another program, called LophtCrack. it is currently in version 5, it is named LC5. the previous version, LC4 is just as good. u need the full or cracked version of the program. LC5 uses a brute force method by trying all possible combinations of letters numbers, and unprintable characters to find the correct password from the hashes in the pwdump file imported into it from SAMInside. This process of trying all passwords might take 5 minutes if the password is easy, up to a year if the password is long and hard (really really hard). LC5 howver, unlike LC4, is almost 100 times faster. both can be configured to try dictionary and common words before using all possible combinations of everything. Once the correct password is found, it will display the passwords in clear beside each account, including administrator.

I use this method so many times. I've compromised the whole school computer infrastructure. LC4 usually took between 1 second and 10 minutes to find the passwords because they were common words found in any english dictionary. I haven't used LC5 yet.

If there is anything unclear, anything I overlooked, plz tell me so that I can turn this into a very easy to follow tutorial to help anybody crack any windowz pass.

Programs needed: SAMInside (doesn't matter which version or if demo)
LC4 or LC5 (lophtcrack)( must be full version)
NTFSPro (doesn't matter if demo)
any bootdisk maker

Cracked or full version software can be found on any warez site. If u don"t know what that is or where to get the programs, post a message and I'll tell u or give them to u.

P.S: I might not keep track of this forum, because I'm going to create a new topic and post tutorial there. if u want to post, plz post there.

How Long Has Your System Been Running?

Here's how you verify system uptime:

Click Start | Run and type cmd to open a command prompt.
At the prompt, type systeminfo

Scroll down the list of information to the line that says System Up Time.

This will tell you in days, hours, minutes and seconds how long the system has been up.

Note that this command only works in XP Pro, not in XP Home. You can, however, type net statistics workstation at the prompt in Home. The first line will tell you the day and time that the system came online.

FREE Hosting For WAREZ

Tutorial: Free Hosting For Warez (how to do it...)
By: darkraven (aka bobbasic)
Level: Average (takes time)

Place to stick your warez and how to do it.
if you have a file you wish to upload and its too large for a free webhost and you still want it online try this method.

www.rarlab.com: download rar and cut the file up into 1MB files.
Mass Rename them to .doc (i forgot how to do it but its via CMD)
www.hostultra.com: sign up for the free hosting, which has unlimited bandwidth and space with a REAL (yet not your main) hotmail account.
Upload the files via FTP

Goto www.projectw.org
and tell people the link ie. http://www.hostultra.com/blah/blah1.doc - blah100.doc
Use Flashget to download!

And there you have it, as long as the people on hostultra dont find your site your fine icon_razz.gif


Downsides:
hostultra only allows max file size of 1MB files.
hostultra does not allow .exe or .mp3

Hostultra:
Unlimited Data Transfer
Unlimited Disk Space
100mbps Network Connection
99.9% Uptime
Free Sub Directory ( hostultra.com/~you )
Cool yourname.vzz.net URL!
Free Subdomains ( Many domains to choose from! )
Free Domain Hosting ( yourdomain.com )
Custom Domain DNS Control ( A/CNAME/MX Records )
Browser and FTP Uploading
PHP / MySQL*
Unlimited Domains / Unlimited Subdomains
Free Search Engine Submission

Terms Of Use For HostUltra
# In addition to the above, User shall not upload onto their hostultra web space any of the following:

1. audio or video files of any type this includes but is not limited to .wma .wmv .wav .mp3 .avi .mpg .asf .mov (however flash and midi files are allowed);
2. spanned archives such as such as .z01 .rar .ace;
3. any binary files that are not linked to an html page on the Site;
4. sites which contain only (or mostly) downloadable files;
5. download sites of any kind, including but not limited to, shareware, freeware, trialware, demos, warez, appz, gamez, iso, cracks;
6. photo albums, image galleries or TGPs;

Dual Boot After The Fact

I want to run both Windows 2000 Pro and Windows 98 SE on my computer. When I bought a new hard drive, I installed Windows 2000 on it first. But my subsequent research seems to indicate that I should have installed Windows 98 SE first and then Windows 2000 on a separate partition. How do I remove Windows 2000 from the drive so I can partition it and then install Windows 98 SE first and reinstall Windows 2000?



You don't have to remove Windows 2000. Start by installing Windows 98 SE in a different partition. When you're done, insert the Windows 2000 CD and reboot to start Windows 2000 setup. On the Welcome to Setup page, press R (for Repair). When you reach the Windows 2000 Repair Options page, press R again.

You'll then be prompted to select a repair option. Press M for Manual. Then press the Up Arrow until Verify Windows 2000 system files is highlighted; press Enter to clear this selection. Press the Down Arrow to select Continue (perform selected tasks), and then press Enter.

The system will ask whether you have an emergency repair disk. Press L, indicating it should Locate your existing installation. Once it does so, press Enter to complete the repairs. This will establish dual boot for you. (This procedure also works for Windows XP.)


*NOTE:

Don't know if this will also work for Linux. If anyone does try it, please let me know.

Change Text on XP Start Button

Step 1 - Modify Explorer.exe File

In order to make the changes, the file explorer.exe located at C:\Windows needs to be edited. Since explorer.exe is a binary file it requires a special editor. For purposes of this article I have used Resource Hacker. Resource HackerTM is a freeware utility to view, modify, rename, add, delete and extract resources in 32bit Windows executables and resource files (*.res). It incorporates an internal resource script compiler and decompiler and works on Microsoft Windows 95/98/ME, Windows NT, Windows 2000 and Windows XP operating systems.

get this from h**p://delphi.icm.edu.pl/ftp/tools/ResHack.zip

The first step is to make a backup copy of the file explorer.exe located at C:\Windows\explorer. Place it in a folder somewhere on your hard drive where it will be safe. Start Resource Hacker and open explorer.exe located at C:\Windows\explorer.exe.

The category we are going to be using is "String Table". Expand it by clicking the plus sign then navigate down to and expand string 37 followed by highlighting 1033. If you are using the Classic Layout rather than the XP Layout, use number 38. The right hand pane will display the stringtable. We’re going to modify item 578, currently showing the word “start” just as it displays on the current Start button.

There is no magic here. Just double click on the word “start” so that it’s highlighted, making sure the quotation marks are not part of the highlight. They need to remain in place, surrounding the new text that you’ll type. Go ahead and type your new entry. In my case I used Click Me!

You’ll notice that after the new text string has been entered the Compile Script button that was grayed out is now active. I won’t get into what’s involved in compiling a script, but suffice it to say it’s going to make this exercise worthwhile. Click Compile Script and then save the altered file using the Save As command on the File Menu. Do not use the Save command – Make sure to use the Save As command and choose a name for the file. Save the newly named file to C:\Windows.


Step 2 – Modify the Registry

!!!make a backup of your registry before making changes!!!

Now that the modified explorer.exe has been created it’s necessary to modify the registry so the file will be recognized when the user logs on to the system. If you don’t know how to access the registry I’m not sure this article is for you, but just in case it’s a temporary memory lapse, go to Start (soon to be something else) Run and type regedit in the Open field. Navigate to:

HKEY_LOCAL_MACHINE\ SOFTWARE\ Microsoft\ Windows NT\ CurrentVersion\ Winlogon

In the right pane, double click the "Shell" entry to open the Edit String dialog box. In Value data: line, enter the name that was used to save the modified explorer.exe file. Click OK.

Close Registry Editor and either log off the system and log back in, or reboot the entire system if that’s your preference. If all went as planned you should see your new Start button with the revised text.[/b]

Cant See Secure Sites??

Fix the problem with seeing them secrue sites (banks or online stores) i found this very usefull to me at my work (isp backbone support lol, at the time i was regular support  )

Any way... what u need to do is make a new notepad file and write in it the followng DLL's.. just copy-paste these



regsvr32 SOFTPUB.DLL
regsvr32 WINTRUST.DLL
regsvr32 INITPKI.DLL
regsvr32 dssenh.dll
regsvr32 Rsaenh.dll
regsvr32 gpkcsp.dll
regsvr32 sccbase.dll
regsvr32 slbcsp.dll
regsvr32 Cryptdlg.dll


and save it as > all file types, and make it something like securefix.bat.

then just run the file and ur problem shuld be gone.

Free World Dialup

Free World Dialup - http://www.freeworlddialup.com/
"Use FWD to make real, free phone calls using your favorite telephone, computer or PDA and any broadband connection. Call your neighbor or a relative, next door or in another country; all with the same ease, speed, and high quality." Thanks to Jeff Pulver and his crew!

Quick summary:

1 - First, got to http://www.freeworlddialup.com and sign up to get your FWD # and password.
2 - Download http://brands.xten.net/x-litefwd/download/X-LiteFWD_Install.exe FWD/X-Lite ("self-configures") program or go to http://www.myphonebooth.com/ to call any FWD # and U.S. toll free #s using Internet Explorer (Firefox not supported).

Quickstart Guide: http://www.freeworlddialup.com/support/quick_start_guide
FWD Xlite Configuration Guide: http://www.freeworlddialup.com/support/configuration_guide/configure_your_fwd_certified_phone/fwd_xlite/all
MS Windows Messenger Configuration Guide: http://pulver.com/fwd/fwd30news.html#messenger (FWD supports Windows Messenger 4.6/4.7 but not MSN Messenger 5.x.)

3 - To call a U.S. landline/cell #, dial *+arecode+7digit#. (This FWD feature is not listed on their website, but has been working for several months now.)

4 - To call a FWD # from a PSTN (your regular phone), click
http://www.dslreports.com/r0/download/476274~3ccc4c9edbe2a596714a4fd9da897204/fwdaccessnumbers.zip or after you've signed up go to FWD web page, click on "Features", "Access #s" for a list of FWD access numbers in your area. Available in several states in the U.S., UK, NL and DE at this time.

Packet8:
-- To call a P8 phone # from a FWD phone: Dial **898 + 1 + P8 number to be routed to P8 service.
-- To call a FWD # from a P8 phone:
*If the FWD # you are calling contains 5 digits, start to dial with the prefix 0351. For example: 035112345
*If the FWD # you are calling contains 6 digits, start to dial with the prefix 0451.

Call UK:
Get a UK telephone # that will call you on your FWD #. Register http://fwd.calluk.com.

FWD Features: Some features like Voice email needs to be activated at http://www.fwdnet.net

Internet Calling
Call Waiting
CallerID
Missed Call notification
Call Forwarding
Call Transfer
Three Way Calling
Voice email
SoftPhone, IP Phones & *Web-based
Aliases
Whitepages directory
ENUM Entry
eDial SOAP
Conferencing
Instant Messaging
Web Calling/FWD-Talk
Corporate Cisco Call Manager Connection
Calling to Toll Free Numbers in the UK, US, NL, JP and FR TellMe Service (411).
-- NL Dial *31(800)... to reach Netherlands toll free #s.
-- UK Dial *44(800)... or *44(808)... or *44 (500) to reach UK toll free #s.
-- US Dial *1(8xx) xxx xxxx to reach United States toll free #s.
-- JP Dial *81 0120... to reach Japan toll free #s.

Frequently used numbers
613 Echo test
55555 Volunteer Welcome Line
514 FWD Coffee House
612 Time
411 TellMe Information
611 Part Time Technical support
511 FWD Conference Bridge

At the moment, I think this is way better than Skype, Yahoo IM voice chat, etc...I've been using FWD for over a year with my cable broadband service and didn't have to set up any port forwarding on my broadband router. Obviously you'ld need a mic/speakers connected to your PC.

You can also use your regular telephone via an adapter http://voipstore.pulver.com/product_info.php?products_id=32 and IP phone http://voipstore.pulver.com/product_info.php?products_id=33. Adapters and IP phones from different vendors like Cisco are available.

* Broadbandreports.com VoIP forum (formerly known as DSLReports.com)
-- If you have any questions or just curious about VoIP, visit the VoIP forum http://www.dslreports.com/forum/voip at DSLReports.com.

Accessing The Entire Internet On Your 3 Phone, U8110, E616 etc.

If you have a phone thats with the provider 3 theres a simple trick to allow you to access the entire internet on its browser without having to go through 3 services and only what they want to allow you access to view.

Simply do the following.

Menu - 9 (for settings) - 5 (for access points) - Edit the 3 Services
Change the APN (down the bottom) from 3services to 3netaccess
Restart the phone
And you can now access the entire internet through your phones browser.

Remember you'll have to change it back if you want to access 3 services.
Changing it in the browser doesn't seem to work.

I have tried this on my U8110 and it worked perfectly

Things to note:

    * Remember that you are charged for all downloads (.4c per kb on most plans) so if your cautious about your phone bill id advise staying away from sites with loads of pictures.
    * Also, some people have had trouble where they have accessed a site with too much information on it and the phone has either froze or reset. The phone is not harmed by this but its advisable you dont go to large sites on it for this or the above reason. If your phone freezes and you cant turn it off simply take the battery out and put it back in.

Create An Ftp Server On Your Pc With Serv-u

Requirements:
Serv-U
No-IP.com Website

Quote:
Step 1. Getting a static IP address.
Get a static address for your FTP server. You will want to do this as opposed to using your IP address for several reasons. First, it’s easier keeping up-to-date. Imagine having to change all of your setting every time your IP changed. With No-IP, the No-IP service runs in background on your computer and updates your current IP address with your FTP server’s URL (for example, you get ftp://rkchoolie.serveftp.com). Second reason, you don’t want your IP address posted out there for everyone to see.

1. Go to www.No-IP.com to create a new user account.
2. Fill in the information that is required and the click Register button.
3. Your account has now been created and your account password has been emailed to you.
4. Check your email mailbox and wait for the mail that contains your password
5. Go back to www.No-IP.com and type your email address and password to login to your account.
6. Once in your account, click on Add a host in the left menu
7. Type in the Hostname you want (example: rkchoolie) and pick a Domain from the list (example: ftpserve.com)
8. Check Allow Wildcards and click the Submit button
9. You now have your static address (example: rkchoolie.serveftp.com)
10. Click on your OS link in the Dyn-Update Client in the bottom right menu and follow links to download the client
11. Once downloaded, install the software and type in your email address and password when asked.
12. Finally tick the checkbox near your static address.

You now have a static web address .


Quote:
Step 2. Installing and setting the FTP server
1. Install Serv-U 4.0.
2. Start Serv-U and use the wizard to setup your ftp.
3. Click next until you're asked for an IP address, leave it blank and then click next.
4. Type the domain name you've just registered above (example: preacher.serveftp.com) in the domain name field and then click Next.
5. You are asked if you want to allow anonymous access, select No and then click next.
6. You are then asked to create a named account, check yes and then click next.
7. Type in the user name you wish for this account (example: Harrie) and click next.
8. Type a password for this account (example: $p3c1aL). For security reasons, try to create a password with some letters, numbers and special characters. Then click next.
9. You will then be asked for the Home directory of the account you just created. Select the directory and then click next.
10. Select yes to lock this account to the Home directory. You want to do this so that the user can not go any further up that his home directory. Click next.
11. The account is now set so click finish.

Quote:
Step 3. Configuring user accounts
1. In the left tree-menu, select the account you've just created and then click on the General tab.
2. Check Hide ‘Hidden’ Files.
3. Check Allow only and enter the number one in the box.
4. Set the Max. download speed to what ever you want. If this is an account that many will be using, set it low to save on your bandwidth. I usually have mine set between 10 – 20. If you leave it blank, users will be able to download from you at full bandwidth.
5. Set the Max no. of users to how many you want to be able to log on at one time. This depends on your connection speed but try these (56 - 1, ISDN - 3, ADSL or cable - 5-6 users.)
6. Now, click on the Dir Access tab.
7. You should see the home folder in there. Highlight it and make your permissions.
8. If you only want users to be able to download check only Read, List, & Inherit.
9. If you want users to be able to upload, but to only one particular folder but not download, click the add button and then select that folder. Now highlight the folder and set these permissions on that folder. Check Write, Append, List, Create, & Inherit. Once you have made the permissions click on the up arrow that is located at the bottom right-hand corner. You want this special upload folder to be list first, before the home folder.
10. If there is a folder that you don’t want anyone to have access to, but it is inside the home folder, then click the add button and then select that folder. Now highlight the folder and make sure that all checkboxes are left. Once you have made the permissions click on the up arrow that is located at the bottom right-hand corner. You want this no access folder to be listed at the very top.
11. There are many other different sets of permissions you can play with. I just covered your basics.
12. Your server is now set!
13. Try logging on with the username and password and see if it works.